The MixPro™ line of top entry flex protected ‘VTG’ style agitators provides customers with a robust, reliable agitation source for high production industrial environments. MixPro生产的顶端进入式柔性保护“VTG”型混合器为用户提供了一种坚固耐用，适于环境要求高的行业的搅拌器。 Process flexibility can be achieved by means of a simple sheave change.通过简单的更换搅拌叶的方式，达到灵活调整混合的工艺。 The unique ‘VTG’ design not only utilizes the concept of modularized components but also incorporates easily accessible service points for maintenance personnel. 独特的“VTG”设计，不但模块化的组成概念，而且将维护点合并使维护人员更容易操作。 The ruggedness of the unit has proven itself in abusive applications, consequently minimizing downtime. 这种混合器自身坚固的结构证明其耐用性能，通常能作到***少的停机检修。 This established MixPro™ design is widely recognized by industry as a leader in top entry agitation equipment. MixPro®顶装式混合器的设计使他成为在工业界被广泛承认的行业***者。 Features & Benefits特长 • Modularized drive concept allows for quick, easy replacement of major components.模块化的设计理念达到快速容易的更换主要部件。 • A robust manufactured carbon steel bearing housing assembly, intricate to the flex protected drive, isolates the gear reducer from the dynamic and static loads associated with the wet end of the agitator. 坚固的轴承套结构，复杂的挠性保护传动，带有动载荷和静载荷的独立齿轮减速机与湿端搅拌轴相联接。 • Wet end attaches to an independent bearing housing assembly which utilizes SKF spherical roller bearings with a minimum L-10 life of 100,000 hours.湿端与独立的轴承套结构相联接，应用SKF滚动球面轴承，***少的使用寿命为100,000小时. • The agitator drive heads are available in a variety of configurations, matched to the application (ie. flange mount, plate mount, with tank seal, without tank seal, etc.).混合器驱动的联接提供各种结构和匹配方式（如，法兰联接，平板联接，带有或不带油密封箱等） • Optional tank seal is intricate to the bearing housing, eliminating shaft misalignment.选用箱式密封是复杂的轴承箱，消除轴的不对正性能。 • Reduction through the v-belt drive and isolation of the dynamic loads enables a much smaller reducer to be sized for the mixer drive head, saving in down time and capital costs.对于混合器的驱动来说,可以通过缩减V型皮带传动和独立的动态负荷能够使减速机结构更小,这样节省了投资和停修时间. • Non proprietary reducers are used in the ‘VTG’ design allowing for reducer manufacturer preferences and competitive parts pricing.VTG属于非专利结构的减速机,允许制造商通过进行相关参数的选择和配件竞价. • The reducer is sized to accommodate the overhung load associated with the belt pull and maintain a minimum bearing L-10 life of 100,000 hours.减速机的允许超吊荷重按皮带传动来设计的,轴承的***少使用时间为100,000小时.(超吊荷重: 当减速机在输出轴装设有皮带轮、链轮等类似元件. 用来联结被动机以传递动力时，由于皮带、链条其作用力关系而对输出. 轴所造成的负荷。) • The minimum mechanical service factor of the gear reducer is 1.5. The thermal rating of the reducer exceeds the mechanical rating of the reducer. Larger service factors are available upon request. 齿轮减速机的***少的机械过负荷因子为1.5。减速机过负荷时有散热能力。可以根据用户需求采用更大的过负荷因子。 • Process flexibility can be achieved through a simple and easy sheave change.通过简单的更换皮带轮的方式可以达到搅拌工艺的灵活调整。 • OSHA shaft and belt guarding are standard for increased safety. 标准的OSHA轴和皮带安全罩使增加了运行安全性。 • To allow for easy access and serviceability, the inspection port doors are hinged as a standard on belt guards. 容易靠近和维护，检查孔的门用标准绞链连接在皮带安全罩上。 • Readily accessible lubrication lines and inspection points are incorporated into the design for increased maintenance serviceability.容易靠近的加油孔和检查点合并为一体的设计，使维护更容易。